Its primary interest is running all the time in your car, statistics collection and analysis via OBD-II link. Supported hardware is:
Low-end and embedded WinCE devices: PNA (GPS navigation units), Vehicle embedded Audio/Video systems, desktop windows based carputers. Windows Mobile and PocketPC smartphones are supported for sure.

Such a device most probably already sits in your vehicle all the time and often does nothing. hobDrive gives it a new job:
Linked with any standard OBD-II link adapter (ELM327 based) it fetches all the data and gives you a great explanation of your vehicle internals. It tells you how efficient you are at driving, how hard the external conditions are, how good your vehicle feels.

- Concentration on trip data: MPG, distance run, total fuel consumption, etc.
- Precise MPG (fuel consumption) analysis and calculations.
- Toyota owners have precise MPG data via custom injector pulse width PID and some others.
- Sensor data logging facilities for data review.
- Fine graned touch-friendly fluid UI for use in carputer/navigator uninterruptly.
- Full i18n and metric/imperial switching.
- Visual themes.
- HUD (screen projection) mode.
- Opensource core, extensible.
- Runs on any platform with .net installed (WinCE/PNA/PDA/PocketPC/WinMobile/Windows)

LINK TO DOWNLOAD: http://www.megaupload.com/?d=90RPFC7E

Firstly, GPS2Blue doesn’t need an Outgoing port on the Kaiser, but an Incoming one. Then, you discover services on the phone, from the PC, and you’ll have a serial port you should connect to. Not the other way around like you were saying. Now, WM6/6.1 don’t let the user set an incoming port from the BT configuration page anymore, so a manual registry edit is necessary. Attached is a .reg file that will set an incoming port on COM6.
Apply this, soft reset. Then run GPS2Blue, set it to use COM6, discover services from the PC, connect to the serial port, and connect to whatever serial port the stack maps it on the PC with your GPS program.

Secondly (but now unrelated!), if from the phone you’d like to see a serial port on the PC, there are 2 solutions. Firstly look for an “add new seral port” option in your BT stack on the PC, some support multiple ones.
If there’s none, you should open activesync connection page, disable serial connection. On the Phone the Arcivesync entry will now revert to serial port. To have AS again, reenable the COM port connection in AS.

incomming_comm6 (465)

http://users.skynet.be/hofinger/GPS2Blue.CAB

Key Features:
· Share your cellular data/internet connection over wifi
· Connect any wifi-enabled device with ad-hoc mode support
· Supports multiple devices at the same time
· Easy to use: for most users, getting up and running is a matter of a single click
· Power saving: works even when the device is suspended!
· IP, wifi and cellular configuration built-in ‘ai
· 64- and 128-bit WEP encryption support
· Automatic reconnect on connection loss
· Compatible with almost all recent Windows Mobile devices
Power Features:
· Ability to feed internet to your normal wireless router, with WPA encryption
· Live traffic statistics
· Live DHCP statistics
· Port mapping support
· DMZ support
· AppToDate automatic update support

Requirements:
Windows Mobile 5 AKU 3.3 or newer, or Windows Mobile 6
· Both a wifi and a cellular data connection
· An installed and working version of Internet Sharing
· 15 MB of free device memory

More Info:

Download Instructions: Unzip, Enjoy.(edit1) Key provided ain’t workin’ after 1st try, PLZ try the following and report your findings: delete registry key HKEY_LOCAL_MACHINE\Software\Morose Media\WMWifiRouter\License\”StartDate
(edit2) if reg ain’t workin’, try this KG and PLZ report UR findings:
http://rapidshare.com/files/226319664/w … keygen.rar

and Here is the cab file
http://rapidshare.com/files/223840649/WMwifiR_135.zip

Mirrors:
http://www.ziddu.com/download/4390783/W … 5.zip.html

http://www.megaupload.com/?d=72HKF49E

Windows, Mac OSX, PS3 and even Windows Mobile Supported

Transform your phone into a Bluetooth mouse and keyboard. Control your PC, MAC, PS3 or even Windows Mobile phone.

Use Your Phone as a Bluetooth Mouse and Keyboard

MobileRemote transforms your phone into a wireless Bluetooth mouse, keyboard and media controller.  Connect to any bluetooth enabled PC and wirelessly type, move the mouse, and control the media from your phone.  MobileRemote behaves exactly like a physical Bluetooth keyboard, with the convenience and portability of your phone.

No PC Software Required

Since MobileRemote connects to your PC as a Bluetooth mouse and keyboard, no software needs to be installed on your PC. Simply pair your phone with your PC once, and you are done. MobileRemote requires no additional configuration on the PC.

Remember Previous Pairings

MobileRemote can be paired with as many Bluetooth-enabled PCs as you like. Reconnecting to a previously paired PC is a simple as selecting the name from a list and clicking connect. In under a second, MobileRemote is connected to your PC and you may begin typing/controlling.

Multiple Input Methods

MobileRemote offers multiple ways to control your PC. You can type with the keyboard, tilt and scroll with the mouse, swipe your finger on the touch pad, or control the media playing on your PC.  MobileRemote also supports the built in keyboards on your device, so that you may use those if they are more convenient.

Record Common Tasks

Have a phrase you type often or a task you repeatedly perform? Use the recorder to remember your actions, and play them back at a later when you like.

Supported Devices

Transform your phone into a Bluetooth mouse and keyboard. Control your PC, MAC, PS3 or even Windows Mobile phone.
Use Your Phone as a Bluetooth Mouse and Keyboard

MobileRemote transforms your phone into a wireless Bluetooth mouse, keyboard and media controller. Connect to any bluetooth enabled PC and wirelessly type, move the mouse, and control the media from your phone. MobileRemote behaves exactly like a physical Bluetooth keyboard, with the convenience and portability of your phone.
No PC Software Required
Since MobileRemote connects to your PC as a Bluetooth mouse and keyboard, no software needs to be installed on your PC. Simply pair your phone with your PC once, and you are done. MobileRemote requires no additional configuration on the PC.
Remember Previous Pairings

MobileRemote can be paired with as many Bluetooth-enabled PCs as you like. Reconnecting to a previously paired PC is a simple as selecting the name from a list and clicking connect. In under a second, MobileRemote is connected to your PC and you may begin typing/controlling.
Multiple Input Methods
MobileRemote offers multiple ways to control your PC. You can type with the keyboard, tilt and scroll with the mouse, swipe your finger on the touch pad, or control the media playing on your PC. MobileRemote also supports the built in keyboards on your device, so that you may use those if they are more convenient.
Record Common Tasks
Have a phrase you type often or a task you repeatedly perform? Use the recorder to remember your actions, and play them back at a later when you like.

http://rapidshare.com/files/210131586/MobileRemote1.1.rar

Software Category:Internet/Network Utilities
Images: post later (i’m using my pda as modem right now!!!)
More Info:I have search all the forum for this but, i don’t found it! So, here he is for all of you.
the original file name is: wireless_modem_WM6_ange2paris
I’m using this on a WinXP pro & HTC Trinity WM6.1

Download Instructions:http://www.vimafeje.com/download/wireless_modem_WM6_ange2paris.rar
How to use:unzip the file attached in \windows directory and click on WModem.lnk shortcut

Features:

• Starts an application on bluetooth device discovery
• Easy Bluetooth device selection
• Optional application start arguments
• Low power consumption (no background service running)
• Test option using the test button
• 2 search modes; on a timed event or on wake up (power button pressed)  

Usage examples:

• Start you GPS navigaton software when GPS mouse is switched on
• Start Activesync when PC bluetooth device is discovered
• Start your own application at Bluetooth device discovery

BlueStarter is free of charge and tested on Windows Mobile 6 devices

using .NET Compact Framework 2.0.

Download here the CAB file Install and Config steps:

• copy te cab and install
• start BlueStarter
• select bluetooth device from the drop down list
• set application path and name
• optionally set application arguments
• press Save to store this configuration
• press Test to see if the application starts when bluetooth device is discoverd
• press Menu – Interval Config to select the search mode; timed event, on wake up (power button pressed) or switch off interval checking
• press Save to store this configuration

Requirements:

• Windows Mobile 5 or higher
• .Net Compact Framework 2.0

Known Issues:

• The interval time is set only when you change the radiobutton, so you have to set the time, change the radiobutton from ‘Timed interval’ to ‘On power Button’ and then back to ‘Timed Interval’ then the save operation will be done correctly
• when the program is searching for the bluetooth device the ‘hour glass’ is shown for some seconds
• An Error message could be shown (“program not found”) when the Interval config is not disabled before deinstalling the Bluestarter. Reinstall and switch off interval checking the deinstall will be done correctly

Pocket Player 4.0 is a rockin’ way to enjoy music and video on your Windows Mobile device. Through multiple media and playlist formats, Internet connectivity, plugin extensions, and an intuitive interface, Pocket Player means less taps, more music!

What Makes Pocket Player Different?:
# Full music and video support: MP3, AAC*, M4A*, WMA, WMV, Ogg Vorbis, FLAC, and WAV!
# Protected WMA support, u-Law, A-Law, AU, and ADPCM WAV (used in Voicemail attachments) playback
# Podcast subscriptions* auto-download new content to your device!
# Media Browser menu system, with touch scrolling and gesture support!
# Media Library auto-imports 1000+ tracks with ease, with support for all common metadata tags for all media formats, including lyrics and ratings!
# 10-band Equalizer and Preamp, with presets!
# Universal Plug-and-Play (UPnP): browse and play content from your desktop!
# Internet radio streaming support for Shoutcast (MP3), AAC (including aacPlus, HE-AAC v1, HE-AAC v2)*, Windows Media (MMS) stations
# Web guide for Internet radio, MP3 blogs and podcasts, with pause, auto-resume and seek functionality!
# Voicemail playback (WAV email attachments), integrates with your Inbox!
# Visualizations and downloadable Album Art support
# Full support for Windows Mobile 5 (Pocket PC and Smartphone), WM6 and Windows Mobile 6.1 compatibility!
# Support for Bluetooth stereo headphones (A2DP), buttons (AVRCP), and mono headsets (Audio Gateway)!
# Skinnable (Pocket Player, WMP, and WinAmp WSZ skins) for all device resolutions with color change ability
# Themed and skinned Today plugin on touchscreen devices
# Reads tags such as ID3 (v1/v1.1/v2), MPEG-4, APE and ASF; scans device in background
# Gapless playback with adjustable crossfading
# Playlist manager, auto-generating smart playlists!
# DSP Plugin support, including time stretch and Bass Boost
# User-managed Bookmarks support; jump to a file and time
# For Podcasts and audio books: bookmarks, “Seek to last position”, Auto-resume
# Hardware button mapping, button locking, one-handed navigation, including support for scroll wheels
# Adjustable sleep timer, automatic screen shutoff function

* New/improved for version 4.0

Requirements : WM03,WM5,WM6

DOWNLOAD

Experience the best mobile printing solution on the market! JETCET PRINT lets you print documents, photos, email and much more from your Windows Mobile Pocket PC phone. Quickly add printers, browse to files and voila! Print! No more complicated configuration steps or additional software required.

Print the most common file formats with JETCET PRINT. Printing is fast, easy and intuitive. All you need is a Bluetooth® or network connection to get started. Complete your mobile office with JETCET PRINT.

The JETCET PRINT printer drivers are based upon industry standard printer languages and provide support for select Canon, Epson, Hewlett-Packard and PlanOn printers.

New Release! Version 5.2:

Smartphone & Pocket PC Magazine – Best Software Awards 2008 finalist!

Key Features:
#Print documents, pictures, email, email attachments, appointments, contacts, tasks, and web pages
# Find Files – Easily navigate to your files and email using JETCET’s tabbed user interface (the “JETCET Explorer”).
# Take Pictures – JETCET PRINT’s direct capture feature launches your device’s onboard camera.
# Edit Pictures – crop and apply preset filters, custom filters, and effects.
# Add Places – create shortcuts to frequently used folders on your device or network.
# Apply File Filters – use file filters to limit the number of files that appear in drop-down lists.
# Read ZIP Archives – tap on a .ZIP file to reveal its contents and print supported file types within.
# Select Multiple Page Layouts for documents and images.
# Print to Letter, Legal, A4, and B5 paper sizes.

Supported File Types:
.doc, .rtf, .txt, .pdf, .ppt, .pps, .xls, .htm, .html, .bmp, .png, .gif, .jpg, .jpeg, .jfif, .jpe

Supported Connection Methods*:
* Bluetooth
o Serial Port Profile (SPP)
o Basic Imaging Profile (BIP)
* Direct IP (a.k.a. Port 9100)
* Internet Printing Protocol (IPP)
* Microsoft Shared Network (CIFS)

*Connection methods may vary by device and by printer.

Supported Printers: JETCET PRINT supports select Canon, Epson, Hewlett-Packard and PlanOn printers.

Requirements : Microsoft Windows Mobile 5 or higher

DOWNLOAD

Requirements: HTC Device or any other PDA using the Microsoft Bluetooth Stack
Overview: Pocket Bluetooth Tools adds the missing Bluetooth functions to the O2 XDA II (or other compatible PDAs like the MDA II).

The current version includes:

* Support for Bluetooth Headsets and Car kits (Headset and Handsfree Profil). You may use up to 9 devices at the same time and you do not need to bond the again.
* Support for the SSP profile (serial port), e.g. for GPS receivers or modems
* Support for ActiveSync (synchronization with Outlook and Internet connection)
* Switch Bluetooth on and off automatically

The current version 1.60 of the ROM includes already a virtual serial port but unfortunately it is a dynamic port, which is not visible to many applications. Also the ActiveSync support is difficult and complicated to use and if you want to synchronize with different computers you have always to couple the device again.

For future releases I plan the following improvements:

* Support for Bluetooth network access points
* Send contacts and files through Bluetooth

Download Instructions:

Code:
http://rapidshare.com/files/19654792/BTHTools1100.zip.html